By Scientia Professor Liangchi Zhang

Journal articles

Liu M; Ruan HH; Zhang LC, 2012, 'A new method for measuring the residual stresses in multi-layered thin film systems', Advanced Materials Research, 591-593, pp. 884 - 890, http://dx.doi.org/10.4028/www.scientific.net/AMR.591-593.884

Duan ; Zhang LC, 2012, 'A reliable method for predicting serrated chipping in high speed cutting: analysis and experimental verification', International Journal of Advanced Manufacturing Technology, online, pp. 1 - 11, http://dx.doi.org/10.1007/s00170-012-4125-0

Jin X; Zhang LC, 2012, 'A statistical model for material removal prediction in polishing', Wear, 274-275, pp. 203 - 211, http://dx.doi.org/10.1016/j.wear.2011.08.028

Duan CZ; Zhang LC, 2012, 'Adiabatic Shear Banding in AISI 1045 Steel during High Speed Machining:Mechanisms of Microstructural Evolution', Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, 532, pp. 111 - 119, http://dx.doi.org/10.1016/j.msea.2011.10.071

Gao CY; Liu PH; Zhang LC, 2012, 'An explicit integration algorithm for introducing user-defined thermo-viscoplastic constitutive models in FE simulations.', Materials Science Forum, 697 - 698, pp. 204 - 207, http://dx.doi.org/10.4028/www.scientific.net/MSF.697-698.204

Tang F; Chen Y; Zhang LC, 2012, 'Analysis of polished polycrystalline diamond using dual beam focused ion beam microscopy', Philosophical Magazine, 92, pp. 1680 - 1690, http://dx.doi.org/10.1080/14786435.2012.657706

Cui D; Mylvaganam K; Zhang LC, 2012, 'Atomic-Scale grooving on copper: End-milling vs. Peripheral-milling', Advanced Materials Research, 565, pp. 546 - 551, http://dx.doi.org/10.4028/www.scientific.net/AMR.565.546

Gao CY; Zhang LC, 2012, 'Constitutive modelling of plasticity of fcc metals under extremely high strain rates', International Journal of Plasticity, 32-33, pp. 121 - 133, http://dx.doi.org/10.1016/j.ijplas.2011.12.001

Bao R; Zhang LC; Li HF, 2012, 'Cutting effectiveness in machining a spherical surface', International Journal of Advanced Manufacturing Technology, pp. 1 - 10, http://dx.doi.org/10.1007/s00170-012-4339-1

Mylvaganam K; Zhang LC, 2012, 'Effect of bct-5 Si on the Indentation of Nanocrystalline Silicon', Applied Mechanics and Materials, 117 - 119, pp. 666 - 669, http://dx.doi.org/10.4028/www.scientific.net/AMM.117-119.666

Liu M; Ruan HH; Zhang LC; Moridi A, 2012, 'Effects of misfit dislocation and film-thickness on the residual stresses in epitaxial thin film systems: Experimental analysis and modeling', Journal of Materials Research, 27, pp. 2737 - 2746, http://dx.doi.org/10.1557/jmr.2012.304

Xu W; Zhang LC; Wu YB, 2012, 'Micromechanical Modelling of Elliptic Vibration-Assisted Cutting of Unidirectional FRP Composites', Advanced Materials Research, 591-593, pp. 531 - 534, http://dx.doi.org/10.4028/www.scientific.net/AMR.591-593.531

Nguyen T; Zhang LC, 2012, 'Prediction of the Hardened Layer in Traverse Cylindrical Grinding-hardening', Materials Science Forum, 697-698, pp. 13 - 18, http://dx.doi.org/10.4028/www.scientific.net/MSF.697-698.13

Tang CY; Zhang LC; Mylvaganam K, 2012, 'Rate dependent deformation of a silicon nanowire under uniaxial compression: Yielding, buckling and constitutive description', Computational Materials Science, 51, pp. 117 - 121, http://dx.doi.org/10.1016/j.commatsci.2011.07.037

Chen Y; Zhang LC; Tang F, 2012, 'Surface integrity of PCD composites generated by dynamic friction polishing: Effect of processing conditions', Diamond and Related Materials, 26, pp. 25 - 31, http://dx.doi.org/10.1016/j.diamond.2012.04.002

Zhang LC; Wei JQ; Xie HL; Qi F; He Y; Xu CS, 2011, 'Measurement of nozzle geometry with X-ray phase contrast imaging technique', Neiranji Xuebao/Transactions of CSICE (Chinese Society for Internal Combustion Engines), 29, pp. 364 - 369

Mylvaganam K; Zhang LC, 2011, 'Micro/nano tribology', , pp. 121 - 160, http://dx.doi.org/10.1533/9780857091444

Ruan H; Zhang LC, 2011, 'A Monte-Carlo approach for modeling glass transition', Journal of the American Ceramic Society, 94, pp. 3350 - 3358, http://dx.doi.org/10.1111/j.1551-2916.2011.04784.x

Gao CY; Zhang LC; Yan HX, 2011, 'A new constitutive model for HCP metals', Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, 528, pp. 4445 - 4452, http://dx.doi.org/10.1016/j.msea.2011.02.053

Ruan HH; Zhang LC; Lu J, 2011, 'A new constitutive model for shear banding instability in metallic glass', International Journal of Solids and Structures, 48, pp. 3112 - 3127, http://dx.doi.org/10.1016/j.ijsolstr.2011.07.004

Rezaiee-pajand MR; Kadkhodayan M; Alamatian J; Zhang LC, 2011, 'A new method of fictitious viscous damping determination for the dynamic relaxation Method', Computers and Structures, 89, pp. 783 - 794, http://dx.doi.org/10.1016/j.compstruc.2011.02.002

Nguyen T; Zhang LC, 2011, 'A Note on Two Cooling Methods in Surface Grinding', Advanced Materials Research, 328-330, pp. 5 - 8, http://dx.doi.org/10.4028/www.scientific.net/AMR.328-330.5

Gu Y; Wang W; Zhang LC; Feng X, 2011, 'An enriched radial point interpolation method (e-RPIM) for analysis of crack tip fields', Engineering Fracture Mechanics, 78, pp. 175 - 190, http://dx.doi.org/10.1016/j.engfracmech.2010.10.014

Duan CZ; Zhang LC; Yu HY; Wang MJ, 2011, 'An investigation into the microstructure of adiabatic shear banding in AISI 1045 hardened steel due to high speed machining', Applications of engineering materials : selected, peer reviewed papers from the 2011 International conference on advanced engineering materials and technology (AEMT 2011), 154-155, pp. 321 - 324, http://dx.doi.org/10.4028/www.scientific.net/AMR.154-155.321

Jin X; Zhang LC, 2011, 'An investigation on the chemical effect in chemo-mechanical polishing', Advanced Materials Research, 325, pp. 451 - 456, http://dx.doi.org/10.4028/www.scientific.net/AMR.325.451

Zhang LC, 2011, 'Australia can learn from the lessons in China', Focus, Aug 11, pp. 23 - 26

Wang Y; Zhang LC; Biddut AQ, 2011, 'Chemical effect on the material removal rate in the CMP of silicon wafers', Wear, 270, pp. 312 - 316, http://dx.doi.org/10.1016/j.wear.2010.11.006

Duan CZ; Zhang LC; Li H; Wang M, 2011, 'Ductile Fracture due to Adiabatic Shear during the Serrated Chip Formation in High Speed Cutting: A Microscopic Investigation', Key Engineering Materials, 467-469, pp. 181 - 185, http://dx.doi.org/10.4028/www.scientific.net/KEM.467-469.181

Bao R; Zhang LC; Yao Q; Lunn L, 2011, 'Estimating the Peak Indentation Force of the Edge Chipping of Rocks Using Single Point-Attack Pick', Rock Mechanics and Rock Engineering, 44, pp. 339 - 347, http://dx.doi.org/10.1007/s00603-010-0133-2

Zhang LC, 2011, 'Fabrication, Characterisation and Application of Carbon Nanotube Polymer Composites', Applications of engineering materials : selected, peer reviewed papers from the 2011 International conference on advanced engineering materials and technology (AEMT 2011), 139-141, pp. 1 - 8, http://dx.doi.org/10.4028/www.scientific.net/AMR.139-141.1

Nguyen T; Zhang LC; Sun D, 2011, 'Heat Transfer in Grinding-Hardening of a Cylindrical Component', Advanced Materials Research, 325, pp. 35 - 41, http://dx.doi.org/10.4028/www.scientific.net/AMR.325.35

Ruan H; Zhang LC, 2011, 'Implementation of glass transition physics in glass molding simulation', Advanced Materials Research, 325, pp. 707 - 712, http://dx.doi.org/10.4028/www.scientific.net/AMR.325.707

Cui D; Mylvaganam K; Zhang LC, 2011, 'Nano-Grooving on Copper by Nano-Milling and Nano-Cutting', Advanced Materials Research, 325, pp. 576 - 581, http://dx.doi.org/10.4028/www.scientific.net/AMR.325.576

Mylvaganam K; Zhang LC, 2011, 'Nanotwinning in monocrystalline silicon upon nanoscratching', Scripta Materialia, 65, pp. 214 - 216, http://dx.doi.org/10.1016/j.scriptamat.2011.04.012

Tang F; Zhang LC, 2011, 'On the reliability of nanoindentation on Si water at elevated temperatures.', Advanced Materials Research, 325, pp. 684 - 689, http://dx.doi.org/10.4028/www.scientific.net/AMR.325.684

Nguyen T; Zhang LC, 2011, 'Realisation of grinding-hardening in workpieces of curved surfaces. Part 1: plunge cylindrical grinding', International Journal of Machine Tools and Manufacture, 51, pp. 309 - 319, http://dx.doi.org/10.1016/j.ijmachtools.2010.12.006

Pramanik A; Zhang LC, 2011, 'Residual stresses in silicon-on-sapphire thin film systems', International Journal of Solids and Structures, 48, pp. 1290 - 1300, http://dx.doi.org/10.1016/j.ijsolstr.2011.01.010

Zhang LC; Xu CS, 2010, 'Study of diesel fuel spray based on avalanche photodiode X-ray imaging technique', Neiranji Gongcheng/Chinese Internal Combustion Engine Engineering, 31, pp. 104 - 108

Zhang LC; Guo MZ, 2010, 'The characterization of certain quantum stochastic stationary process', Acta Mathematica Sinica, English Series, 26, pp. 1807 - 1814, http://dx.doi.org/10.1007/s10114-010-7651-4

Gao C; Zhang LC, 2010, 'A constitutive model for dynamic plasticity of F.C.C. metals', Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, 527, pp. 3138 - 3143, http://dx.doi.org/10.1016/j.msea.2010.01.083

Zhang C; Zhang LC, 2010, 'A general model of fuzzy plasticity', Chinese Journal of Mechanical Engineering, 23, pp. 496 - 504, http://www.cjmenet.com.cn/xuebaoenglish/papersed/allpapered/newaccepted/fulltext/2009-227.pdf

Wang Y; Zhang LC, 2010, 'A review on the CMP of SiC and sapphire wafers', Applications of engineering materials : selected, peer reviewed papers from the 2011 International conference on advanced engineering materials and technology (AEMT 2011), 126-128, pp. 429 - 434, http://dx.doi.org/10.4028/www.scientific.net/AMR.126-128.429

Eyben P; Eyben PE; vanstreels KV; Pourtois G; Clarysse T; Duriau E; Hantschel T; Sankaran K; Mody J; Vandervorst W; Mylvaganam K; Zhang LC, 2010, 'Analysis and modeling of the high vacuum scanning spreading resistance microscopy nanocontact on silicon', Journal of Vacuum Science and Technology B, 28, pp. 401 - 406, http://dx.doi.org/10.1116/1.3273895

Mostafavi SS; Zhang LC; Lunn J, 2010, 'Chipping Brittle Materials: A Finite Element Analysis', Key Engineering Materials, 443, pp. 433 - 438, http://dx.doi.org/10.4028/www.scientific.net/KEM.443.433

Zhang LC; Biddut A; Ali Y, 2010, 'Dependence of pad performance on its texture in polishing mono-crystalline silicon wafers', International Journal of Mechanical Sciences, 52, pp. 657 - 662, http://dx.doi.org/10.1016/j.ijmecsci.2009.09.017

Liu M; Zhang LC; Brawley ; Atanackovic2 P; Duvall S, 2010, 'Determining the Complete Residual Stress Tensors in SOS Heteroepitaxial Thin Film Systems by the Technique of X-Ray Diffraction', Key Engineering Materials, 443, pp. 742 - 747, http://dx.doi.org/10.4028/www.scientific.net/KEM.443.742

Yao Q; Zhang LC; Bao R; Lunn J; Melmeth C, 2010, 'Edge chipping of rock: An experimental study', Key Engineering Materials, 443, pp. 456 - 461, http://dx.doi.org/10.4028/www.scientific.net/KEM.443.456

Pramanik A; Zhang LC; Chen Y, 2010, 'Efficient machining of artificial hip joint components', Applications of engineering materials : selected, peer reviewed papers from the 2011 International conference on advanced engineering materials and technology (AEMT 2011), 97-101, pp. 2269 - 2272, http://dx.doi.org/10.4028/www.scientific.net/AMR.97-101.2269

Chen Y; Zhang LC, 2010, 'Fast polishing of single crystal diamond', Applications of engineering materials : selected, peer reviewed papers from the 2011 International conference on advanced engineering materials and technology (AEMT 2011), 97-101, pp. 4096 - 4099, http://dx.doi.org/10.4028/www.scientific.net/AMR.97-101.4096

Nguyen T; Zhang LC, 2010, 'Grinding–hardening using dry air and liquid nitrogen: Prediction and verification of temperature fields and hardened layer thickness', International Journal of Machine Tools and Manufacture, 50, pp. 901 - 910, http://dx.doi.org/10.1016/j.ijmachtools.2010.06.002

Back to profile page